Menu
Your Cart

NuPrime Evolution DAC-2

NuPrime Evolution DAC-2 - Pre-amp (stereo), D/A converter DAC
NuPrime Evolution DAC-2 - Pre-amp (stereo), D/A converter DAC
NuPrime Evolution DAC-2 - Pre-amp (stereo), D/A converter DAC
NuPrime Evolution DAC-2 - Pre-amp (stereo), D/A converter DAC
NuPrime Evolution DAC-2 - Pre-amp (stereo), D/A converter DAC
NuPrime Evolution DAC-2 - Pre-amp (stereo), D/A converter DAC
NuPrime Evolution DAC-2 - Pre-amp (stereo), D/A converter DAC
NuPrime Evolution DAC-2 - Pre-amp (stereo), D/A converter DAC
NuPrime Evolution DAC-2 - Pre-amp (stereo), D/A converter DAC
NuPrime Evolution DAC-2 - Pre-amp (stereo), D/A converter DAC
NuPrime Evolution DAC-2 - Pre-amp (stereo), D/A converter DAC
NuPrime Evolution DAC-2 - Pre-amp (stereo), D/A converter DAC
NuPrime Evolution DAC-2 - Pre-amp (stereo), D/A converter DAC
NuPrime Evolution DAC-2 - Pre-amp (stereo), D/A converter DAC
NuPrime Evolution DAC-2 - Pre-amp (stereo), D/A converter DAC
NuPrime Evolution DAC-2 - Pre-amp (stereo), D/A converter DAC
NuPrime Evolution DAC-2 - Pre-amp (stereo), D/A converter DAC
NuPrime Evolution DAC-2 - Pre-amp (stereo), D/A converter DAC
NuPrime Evolution DAC-2 - Pre-amp (stereo), D/A converter DAC
NuPrime Evolution DAC-2 - Pre-amp (stereo), D/A converter DAC
NuPrime Evolution DAC-2 - Pre-amp (stereo), D/A converter DAC
NuPrime Evolution DAC-2 - Pre-amp (stereo), D/A converter DAC

#The Evolution DAC-2 uses dual ESS Technology 32-bit DAC ESS9038Q2M to decode the left and right channels independently and to improve channel separation and reduce overall noise. It supports nine digital inputs and two analog inputs for complete system flexibility. The power circuit utilizes C-Core transformers to meet the highest performance requirements of the NuPrime Evolution series. PSRC IC chip provides sample rate up/down conversion from PCM 44.1kHz to PCM 768kHz and DSD64 to DSD512.

A reference class preamplifier
The EVO DAC-2 includes a reference class preamplifier that uses Nisshinbo Micro Devices' MUSES8820 operational amplifier and MUSES72320V electronic volume as its preamplifier circuit architecture. The MUSES8820 is optimized for high-end audio equipment and produces top-class sound quality. It has low noise and distortion characteristics and uses a resistor circuit for highly linear volume control. Together, these components make the EVO DAC-2 an exceptional preamplifier capable of producing a high-quality sound that accurately captures the nuances and details of the audio source.

C-Core transformer and large capacitor bank
The filtered AC power is then fed to the AC power supply which uses C-Core transformers. The stainless steel enclosures for the power supply provide shielding to minimize interference from transformer noise affecting other sensitive circuits.

A large capacitor bank (approximately 60,000 uF) using special capacitors supplies the analog and digital circuits with ample and stable current.

Features:

  • The NuPrime PSRC IC chip provides sample rate up/down conversion processing, from PCM 44.1 kHz to PCM 768 kHz and DSD64 to DSD512 (including PCM to/from DSD).
  • A proprietary NuPrime implementation capable of decoding DoP formats via coaxial and optical inputs.
  • Output level as variable or fixed mode.
  • Analog output channel setting (both outputs can be set to Right, Left, R+L or L+R)
  • Adjustment of the display brightness.
  • Nine digital inputs and two analog inputs for complete system flexibility. Full microprocessor control with memory for all inputs.
  • USB Asynchronous transfer mode.
  • USB Supports DSD native playback using ASIO and DoP methods. DSD is decoded natively at the same sampling rate as the input source.
  • Built-in MQA decoding.
  • Individually adjustable volume on each input for precise level matching of sources
  • NuPrime vibration-free isolation feet.
  • Exclusive driver software for Windows, standard driver software for Mac


Specifications:

  • DIGITAL PART:
  • USB:
  • Type B 2.0 Hi-Speed, Windows / Supports PCM 44.1KHz ~ 768KHz / DSD 512 and MQA.
  • Type B 2.0 Hi-Speed, Mac / Supports PCM 44.1KHz ~ 768KHz/24Bit and DOP 256.
  • COAXIAL 1: Supports PCM 44.1KHz ~ 384KHz / DOP 64, 128 and MQA.
  • OPTICAL 1: Supports PCM 44.1KHz ~ 192KHz / DOP 64 and MQA.
  • AES/EBU: Supports PCM 44.1KHz ~ 384KHz / DOP 128 and MQA.
  • IIS/DSD 1& 2: Supports PCM 44.1KHz ~ 384KHz and DSD 256 data streams.
  • EXTENSION: Supports PCM 44.1KHz ~ 192KHz/24Bit.
  • COAXIAL 2: Supports PCM 44.1KHz ~ 192KHz / DOP 64 and MQA.
  • OPTICAL 2: Supports PCM 44.1KHz ~ 192KHz / DOP 64 and MQA.
  • NOTE: DOP (DSD over PCM)
  • ANALOG PART:
  • Analog inputs:
  • AN1 & AN2 (RCA unbalanced inputs) Input impedance: 47K Ohm
  • Analog outputs:
  • RCA unbalanced outputs: 4 Vrms.
  • XLR balanced outputs: 8 Vrms.
  • Output impedance: < 50 Ohm.
  • Frequency response: 20 Hz - 20 KHz / ±0.3 dB.
  • SNR: > 110 dB.
  • THD+N: < 0,0005 %.
  • Dimensions/Weight:
  • Dimensions [W x H x D]: 430 mm x 55 mm x 315 mm.
  • Weight: 5.2 kg
  • Available in black or silver anodized aluminium finish
  • Power consumption: 13.5 W (0.9 W Standby)

Write a review

Note: HTML is not translated!
Bad Good



Buy&Try applies to the entire Aune, Auralic, Quadral, Sbooster & Taga range.

Buy & try gives you as a customer the opportunity to try out the product in your own home environment, instead of standing in a stressful store and trying to form an opinion. Rooms behave very differently and affect the sound in different ways and we give you the opportunity to demo the product for a full 30 days, in your own home.

 

If for some reason you feel dissatisfied, just contact us and we will help you with the return shipping, you can also take advantage of our shipping agreements with lower prices. Costs that will be charged to the customer are the shipping to the customer and the return shipping to us at MYC HiFi. For return approval, the item must be returned in new condition and in the original packaging.

 

Regarding speakers, be aware that speakers may need a long recording time to come into their own. After a couple of hours you can usually get a taste of what to expect, but a speaker deserves 100h+ before serious listening. The speakers we sell with ribbon tweeters need several hundred hours before they start to sing. So feel free to leave the speakers on around the clock so you can quickly accumulate hours.

 

If you have any questions or concerns, do not hesitate to contact us.

 

 

  • Buy & Try applies to goods that are normally kept in stock and not to order goods, unless otherwise agreed.

We provide at least a 2-year warranty on all products, some products have up to a 5-year warranty. With this, you avoid expensive insurances and can feel safe as a customer. In case of problems during the warranty period, contact us and we will solve it quickly and smoothly.


Aune: 2 years

Denon: 2 years

Marantz: 2 years

NuPrime: 2 years

Sbooster: 2 years

Taga Harmony: Passive speakers 5 years

Take Harmony Electronics: 2 years

Take Harmony Cables: 5 years

Quadral: Passive speakers 5 years

Xindak: Cables 5 years


Other products see the manufacturer's warranty.


ATTENTION!

The 2-year warranty does not apply to headphones, demo/service copies or consumables, in these cases the manufacturer's warranty applies. On demo and service copies, the warranty period is stated on the product page.

Lamp warranty

If the lamp for your projector breaks during the first 12 months, or the first 1000 hours (whichever comes first), you will receive a new lamp free of charge. If the manufacturer has a more generous warranty, it applies.