- Availibility: DISCONTINUED
- Class A headphone amplifier
- Use as an independent DAC
- DAC chip ESS Sabre ES9318
- 7x filter modes for different audio signatures
- PCM 768k and DSD512
- Variable Line-out for e.g. active speakers
- Bluetooth aptX HD
- Bluetooth LDAC
- Inputs:
- 1x Bluetooth aptX HD, LDAC
- 1x USB-B
- 1x coaxial
- Outputs:
- 1x Stereo RCA
- 1x 6.35 mm headphone output
- Supported sampling frequencies:
- USB: PCM up to 32bit 768 kHz, built-in DSD up to DSD512
- Coaxial: PCM up to 24bit 384 kHz, DSD DoP up to DoP128
- Line output level @ 0dB OPA : 2Vrms Max
- Tube: 1.9Vrms Max @ 0dBFS
- Frequency response of line output OPA : 20Hz-20kHz ±0.02dB
- Tube: 20Hz-20kHz ±0.6dB
- Line output THD+N@ 1kHz OPA : 0.0003% @ 0dBFS
- Tube: 0.02% @ -17dBFS
- Noise floor for line output OPA : 4µV
- Tube: 20µV @ AES17 (20kHz)
- Headphone output power 45mW @ 300Ω, 0.05
- Headphone output power THD+N @ 1 kHz OPA : 0.0005
- Supply voltage 12VDC
- Dimensions 135 x 101,1 x 27,1 mm
- 1x Flamingo Head Unit
- 1x USB-A male to USB-B male cable
- 1x USB-B male to USB-C female adapter
- 1x Blue tooth antenna
- 1x Adapter for 6.35 mm male jack to 3.5 mm female jack
- 1x 12V power supply
Buy&Try applies to the entire Aune, Auralic, Quadral, Sbooster & Taga range.
Buy & try gives you as a customer the opportunity to try out the product in your own home environment, instead of standing in a stressful store and trying to form an opinion. Rooms behave very differently and affect the sound in different ways and we give you the opportunity to demo the product for a full 30 days, in your own home.
If for some reason you feel dissatisfied, just contact us and we will help you with the return shipping, you can also take advantage of our shipping agreements with lower prices. Costs that will be charged to the customer are the shipping to the customer and the return shipping to us at MYC HiFi. For return approval, the item must be returned in new condition and in the original packaging.
Regarding speakers, be aware that speakers may need a long recording time to come into their own. After a couple of hours you can usually get a taste of what to expect, but a speaker deserves 100h+ before serious listening. The speakers we sell with ribbon tweeters need several hundred hours before they start to sing. So feel free to leave the speakers on around the clock so you can quickly accumulate hours.
If you have any questions or concerns, do not hesitate to contact us.
- Buy & Try applies to goods that are normally kept in stock and not to order goods, unless otherwise agreed.
We provide at least a 2-year warranty on all products, some products have up to a 5-year warranty. With this, you avoid expensive insurances and can feel safe as a customer. In case of problems during the warranty period, contact us and we will solve it quickly and smoothly.
Aune: 2 years
Denon: 2 years
Marantz: 2 years
NuPrime: 2 years
Sbooster: 2 years
Taga Harmony: Passive speakers 5 years
Take Harmony Electronics: 2 years
Take Harmony Cables: 5 years
Quadral: Passive speakers 5 years
Xindak: Cables 5 years
Other products see the manufacturer's warranty.
ATTENTION!
The 2-year warranty does not apply to headphones, demo/service copies or consumables, in these cases the manufacturer's warranty applies. On demo and service copies, the warranty period is stated on the product page.
Lamp warranty
If the lamp for your projector breaks during the first 12 months, or the first 1000 hours (whichever comes first), you will receive a new lamp free of charge. If the manufacturer has a more generous warranty, it applies.