Menu
Your Cart

Aune S17 Pro

Aune S17 Pro - Pre-amp (stereo), Headphone Amplifiers & Headphones
Aune S17 Pro - Pre-amp (stereo), Headphone Amplifiers & Headphones
Aune S17 Pro - Pre-amp (stereo), Headphone Amplifiers & Headphones
Aune S17 Pro - Pre-amp (stereo), Headphone Amplifiers & Headphones
Aune S17 Pro - Pre-amp (stereo), Headphone Amplifiers & Headphones
Aune S17 Pro - Pre-amp (stereo), Headphone Amplifiers & Headphones
Aune S17 Pro - Pre-amp (stereo), Headphone Amplifiers & Headphones
Aune S17 Pro - Pre-amp (stereo), Headphone Amplifiers & Headphones
Aune S17 Pro - Pre-amp (stereo), Headphone Amplifiers & Headphones
Aune S17 Pro - Pre-amp (stereo), Headphone Amplifiers & Headphones
Aune S17 Pro - Pre-amp (stereo), Headphone Amplifiers & Headphones
Aune S17 Pro - Pre-amp (stereo), Headphone Amplifiers & Headphones

With the S17 Pro, Aune introduces a powerful headphone amplifier that can also be used as a preamplifier in a hi-fi system. This headphone amplifier has discrete components and balanced outputs. Its Class A power stage has a pair of JFET transistors with two levels of current adjustment: 50mA and 100mA per JFET for the headphone outputs, plus two AOPs per output for a total of 16 AOPs. It also features an R2R volume control and an attractive front panel color display. Inputs are stereo RCA and balanced stereo XLR. The S17 Pro is powerful enough to drive all types of headphones from 32 to 600 ohms impedance, maximum output power is as high as 7.5W

S17 Pro has a 50W Toroidal Transformer with low noise floor + 19200μF large capacitor bank that offers a proper power reserve. Overall, the sound of the Aune S17 Pro is warm and detailed, with a very low distortion level. It is a high-performance headphone amplifier with fine sound and high output power.

Pair it with the Aune S10N Music Streamer with built-in Sabre 9038Q2M DAC.

  • Class A headphone amplifier
  • 3 connections for headphones
  • Discrete components
  • Fully symmetrical design
  • R2R volume control
  • 50 Watt linear toroidal transformer
  • Aluminum remote control

Dual JFETs produce a tube-like sound.
The JFET has a high input impedance and a rich, smooth sound reminiscent of a tube amplifier.
In the case of the S17 Pro, it's not just one JFET. It's dual JFETs, whose temperature rises and performance are identical and the midpoint voltage is stable.

Two gain levels - Drive your headphones and IEM to their full potential
The S17 Pro has two gain levels. The low gain takes advantage of the Class-A amplifier's feature that the transistors always operate in the linear region, to drive the IEMs well and properly, while the high gain is as high as 7.5W and thus can drive very demanding headphones.

Complex cooler structure
The Class-A amplifier's transistors generate a lot of heat, and a complex three-dimensional structure has been created in which the transistor heatsink + bottom heat sink + chassis form a complete cooling system.

Multifunction button and remote control in aluminum
The front of the S17 Pro is clean and simple, and one multifunction knob lets you adjust power, gain and volume.
The well-designed all-aluminum remote control makes control even easier.

Multi-connectivity
The S17 Pro has 3 headphone outputs, 2 groups of preamp outputs and 2 line inputs.

Input/Output impedance:
RCA input: 10KΩ
RCA preamp output: 200Ω
XLR input: 22KΩ
XLR preamp output: 100Ω
XLR/6.35/4.4 headphone output: 1Ω

Single-Ended 6.35mm Headphone Output:
Frequency range (20Hz~80KHz) ± 0.05dB
THD+N > 0.00038% @ 1KHz
SNR > 115dB @ 600Ω
Crosstalk < -105dB @ 1KHz 600Ω

Balanced XLR Headphone output:
Frequency range (20Hz~80KHz) ± 0.05dB
THD+N > 0.00016% @ 1KHz
SNR > 116dB @ 600Ω
Crosstalk < -110dB @ 1KHz 600Ω

G-L low gain Single-Ended output:
32Ω = 738mW
100Ω = 250mW
150Ω = 166mW
250Ω = 100mW
300Ω = 83mW
470Ω = 53mW
600Ω = 41mW

G-L low gain balanced output:
32Ω = 2773mW
100Ω = 968mW
150Ω = 645mW
250Ω = 388mW
300Ω = 333mW
470Ω = 212mW
600Ω = 166mW

G-H high gain Single-Ended output:
32Ω = 2020mW
100Ω = 675mW
150Ω = 453mW
250Ω = 273mW
300Ω = 228mW
470Ω = 145mW
600Ω = 114mW

G-H high gain balanced output:
32Ω = 7507mW
100Ω = 2643mW
150Ω = 1793mW
250Ω = 1089mW
300Ω = 908mW
470Ω = 580mW
600Ω = 453mW

Specifications:

  • Inputs:
  • 1x stereo RCA input
  • 1x balanced stereo XLR input
  • Outputs
  • 1x 6.35 mm jack output for headphones
  • 1x balanced 4.4 mm jack output for headphones
  • 1x XLR 4-pin balanced headphone output
  • 1x RCA line output
  • 1x XLR line output
  • INPUT/OUTPUT IMPEDANCE
  • RCA input impedance 10KΩ
  • RCA output impedance 200Ω
  • XLR input impedance 22KΩ
  • XLR output impedance 100Ω
  • Headphone output impedance 1Ω
  • 6.35MM JACK HEADPHONE OUTPUT
  • Frequency range 20Hz - 80kHz (+/- 5dB)
  • THD+N < 0.00038% @1kHz
  • SNR > 115dB @600Ω
  • Crosstalk < -105dB @1kHz 600Ω
  • BALANCED XLR HEADPHONE OUTPUT
  • Frequency range 20Hz - 80kHz (+/- 5dB)
  • THD+N < 0.00016% @1kHz
  • SNR > 116dB @600Ω
  • Crosstalk < -110dB @1kHz 600Ω
  • Dimensions 211 x 288 x 63 mm
  • Included in the package:
  • 1x Power cable
  • 1x Remote control (CR1220 battery not included)

Write a review

Note: HTML is not translated!
Bad Good



Buy&Try applies to the entire Aune, Auralic, Quadral, Sbooster & Taga range.

Buy & try gives you as a customer the opportunity to try out the product in your own home environment, instead of standing in a stressful store and trying to form an opinion. Rooms behave very differently and affect the sound in different ways and we give you the opportunity to demo the product for a full 30 days, in your own home.

 

If for some reason you feel dissatisfied, just contact us and we will help you with the return shipping, you can also take advantage of our shipping agreements with lower prices. Costs that will be charged to the customer are the shipping to the customer and the return shipping to us at MYC HiFi. For return approval, the item must be returned in new condition and in the original packaging.

 

Regarding speakers, be aware that speakers may need a long recording time to come into their own. After a couple of hours you can usually get a taste of what to expect, but a speaker deserves 100h+ before serious listening. The speakers we sell with ribbon tweeters need several hundred hours before they start to sing. So feel free to leave the speakers on around the clock so you can quickly accumulate hours.

 

If you have any questions or concerns, do not hesitate to contact us.

 

 

  • Buy & Try applies to goods that are normally kept in stock and not to order goods, unless otherwise agreed.

We provide at least a 2-year warranty on all products, some products have up to a 5-year warranty. With this, you avoid expensive insurances and can feel safe as a customer. In case of problems during the warranty period, contact us and we will solve it quickly and smoothly.


Aune: 2 years

Denon: 2 years

Marantz: 2 years

NuPrime: 2 years

Sbooster: 2 years

Taga Harmony: Passive speakers 5 years

Take Harmony Electronics: 2 years

Take Harmony Cables: 5 years

Quadral: Passive speakers 5 years

Xindak: Cables 5 years


Other products see the manufacturer's warranty.


ATTENTION!

The 2-year warranty does not apply to headphones, demo/service copies or consumables, in these cases the manufacturer's warranty applies. On demo and service copies, the warranty period is stated on the product page.

Lamp warranty

If the lamp for your projector breaks during the first 12 months, or the first 1000 hours (whichever comes first), you will receive a new lamp free of charge. If the manufacturer has a more generous warranty, it applies.