- Availibility: In Stock
This offer ends in:
Available Options
- Dual ESS 32-bit DAC ESS9028Q2M, one for each channel.
- USB PCM384, I2S PCM384, and DSD256
- Supports MQA
- Pre-stage with resistor network
- Isolating vibration damping feet
- Six digital inputs, one set of RCA analog in
- Trigger out
- USB Extension port for streaming (NuPrime Omnia Stream Mini, WR-2 or BTR-HD for blue tooth). This is a special port that provides S/PDIF signals and 5V power supply
- Analog volume control using a low-noise, low-distortion resistor ladder similar to a network of switching resistors.
- Digitally controlled dual-mono analog shunt to ground volume control provides zero additional noise or distortion.
- Individually adjustable volume on each input for precise matching of source level.
- The NuPrime SRC IC chip provides DSP processing where input signals are upsampled to megahertz before being down-converted to the desired sampling frequency with ultra-low jitter and distortion.
- USB port for Bluetooth receiver and music streamer
- Full microprocessor control with memory retention.
- Supports DSD native playback with ASIO2.1 and DoP method.
- Ultra-low noise JFETs in the input stage for the lowest possible noise floor.
- Individually adjustable volume on each input for precise level matching of sources.
- Asynchronous transmission mode.
- Very low power consumption in standby mode.
- Use of Bluetooth and WiFi audio receivers and dongles
- The NuPrime has defined a USB type A port to transport S/PDIF data and 5 V power for connection to an external wireless audio receiver using just a standard USB cable. #The Omnia WR-2, BTR-HD, Stream Mini and Stream Mini DAC wireless receivers have a micro-USB port compatible with this specification. This allows a standard USB-A to micro-USB cable to be used for power supply to the receiver as well as for wireless audio data transmission in S/PDIF format.
- Inputs: Rear panel
- USB: Type B 2.0 Hi-Speed, Windows OS: data stream up to 384KHz/24Bit and Native DSD 256.
- USB: Type B 2.0 Hi-Speed, Mac/Linux OS: data stream up to 384KHz/24Bit and DOP DSD 128.
- IIS/DSD: Supports PCM 44.1KHz ~ 384KHz/32Bit and DSD 64 ~ DSD 256 data streams.
- OPTICAL: Supports PCM 44.1 kHz ~ 192 kHz/24 bit and DOP 64.
- COAXIAL: Supports PCM 44.1 kHz ~ 384 kHz/24 bit and DOP 64 and 128.
- RCA: Up to 1 Vrms audio signal.
- EXTENSION: Supports PCM 44.1 kHz ~ 192 kHz/24 bit.
- Outputs: Rear panel
- Unbalanced RCA outputs: 2x4 Vrms
- XLR balanced outputs: 2x8 Vrms
- Optical S/DPIF output (PCM up to 192 kHz with support for DoP format DSD64)
- Outputs: Front panel
- TRS 6.3 mm headphone output
- Output power:
- Output power: 1700 mW, 32 ohms, <0.01% THD (watts per channel).
- Output power: 135 mW, 600 ohms, <0.005% THD (watts per channel).
- Frequency response: 20 Hz - 20 KHz / ±0.3 dB. SNR: > 110 dB. THD+N: < 0.0005%.
- Dimensions:
- 235 mm W x 281 mm D x 60 mm H (including feet)
- Weight: 2.5 kg
Buy&Try applies to the entire Aune, Auralic, Quadral, Sbooster & Taga range.
Buy & try gives you as a customer the opportunity to try out the product in your own home environment, instead of standing in a stressful store and trying to form an opinion. Rooms behave very differently and affect the sound in different ways and we give you the opportunity to demo the product for a full 30 days, in your own home.
If for some reason you feel dissatisfied, just contact us and we will help you with the return shipping, you can also take advantage of our shipping agreements with lower prices. Costs that will be charged to the customer are the shipping to the customer and the return shipping to us at MYC HiFi. For return approval, the item must be returned in new condition and in the original packaging.
Regarding speakers, be aware that speakers may need a long recording time to come into their own. After a couple of hours you can usually get a taste of what to expect, but a speaker deserves 100h+ before serious listening. The speakers we sell with ribbon tweeters need several hundred hours before they start to sing. So feel free to leave the speakers on around the clock so you can quickly accumulate hours.
If you have any questions or concerns, do not hesitate to contact us.
- Buy & Try applies to goods that are normally kept in stock and not to order goods, unless otherwise agreed.
We provide at least a 2-year warranty on all products, some products have up to a 5-year warranty. With this, you avoid expensive insurances and can feel safe as a customer. In case of problems during the warranty period, contact us and we will solve it quickly and smoothly.
Aune: 2 years
Denon: 2 years
Marantz: 2 years
NuPrime: 2 years
Sbooster: 2 years
Taga Harmony: Passive speakers 5 years
Take Harmony Electronics: 2 years
Take Harmony Cables: 5 years
Quadral: Passive speakers 5 years
Xindak: Cables 5 years
Other products see the manufacturer's warranty.
ATTENTION!
The 2-year warranty does not apply to headphones, demo/service copies or consumables, in these cases the manufacturer's warranty applies. On demo and service copies, the warranty period is stated on the product page.
Lamp warranty
If the lamp for your projector breaks during the first 12 months, or the first 1000 hours (whichever comes first), you will receive a new lamp free of charge. If the manufacturer has a more generous warranty, it applies.