Menu
Your Cart

NuPrime Evolution Two

NuPrime Evolution Two - Mono amps
NuPrime Evolution Two - Mono amps
NuPrime Evolution Two - Mono amps
NuPrime Evolution Two - Mono amps
NuPrime Evolution Two - Mono amps
NuPrime Evolution Two - Mono amps
NuPrime Evolution Two - Mono amps
-15 %
NuPrime Evolution Two - Mono amps
NuPrime Evolution Two - Mono amps
NuPrime Evolution Two - Mono amps
NuPrime Evolution Two - Mono amps
NuPrime Evolution Two - Mono amps
NuPrime Evolution Two - Mono amps
NuPrime Evolution Two - Mono amps

The NuPrime Evolution Two is an upper-class mono output stage offering maximum sound quality.
A breakthrough in distortion reduction - NuPrime calls the technology Only Distortion Cancellation (ODC) and has continued to develop the future of Class-D over the past decade. A typical error correction feedback inverts the output signal for summation with the original input signal to derive the negative error signal, which is added to the next cycle of the input signal to form a more accurate output signal. NuPrime's ODC Class-D design derives the error signal from MOSFET circuits and the output filter circuit directly, which significantly reduces the negative feedback signal, resulting in a substantial reduction in distortion.

With a massive RMS power of 600W @4Ohm and yet achieving ultra-low distortion of THD+N of 0.003% @1kHz(5W), 0.006@1kHz(100W) and less than 0.006% THD+N at 1KHZ(2W~100W), it is an amazing achievement in itself.

  • NuPrimes Only Distortion Cancellation (ODC) Class D design.
  • Preamplifier stage with class-D oscillation circuit using advanced NJR MUSES8820 op-amp.
  • 650KHz switch frequency allows higher resolution to be achieved.
  • The power supply with 900W (Peak Power) high power ultra-thin toroidal transformers has been improved to deliver cleaner and more stable power with lower noise. The entire power path can deliver 40A high current via low-resistance terminals.
  • Improved dynamic capacity. Total 48400uF (one channel) capacitor bank
  • High-quality copper PCB traces instead of ordinary cables are used to connect the power supply to the amplifier circuits, maximizing current delivery.
  • Hybrid Class-D technology that retains the benefits of both Class-A and Class-D amplification.
  • A pure mono implementation.
  • Class-A-like warmth

Evolution TWO's sound characteristics can be described as:
Wide and deep soundstage without loss of clarity at the lowest frequencies. With large-scale orchestral recordings, you will be able to have a clear picture of the lowest nuances of percussion and wind instruments, even the more subtle pedal sounds! Such details are presented in a truthful way without artificial enhancements.
The soundstage is natural and clean thanks to ultra-low distortion, which contributes to a black background, providing greater detail and nuance


Specifications:

  • Power (RMS): 300W @ 8 Ohm, 600W @ 4 Ohm
  • Power (peak): 410W @ 8 Ohm, 820W @ 4 Ohm
  • Gain: x 21
  • Input impedance: 47K Ohm
  • Frequency range: 10Hz to 50kHz (-3dB)
  • Trigger in
  • Standby power : 1W @ 230V
  • Idle power: 14W @ 230V
  • Dimensions (WxDxH): 430 mm x 372 mm x 66,5 mm
  • Weight: 10 kg


Price is per piece

Write a review

Note: HTML is not translated!
Bad Good



Buy&Try applies to the entire Aune, Auralic, Quadral, Sbooster & Taga range.

Buy & try gives you as a customer the opportunity to try out the product in your own home environment, instead of standing in a stressful store and trying to form an opinion. Rooms behave very differently and affect the sound in different ways and we give you the opportunity to demo the product for a full 30 days, in your own home.

 

If for some reason you feel dissatisfied, just contact us and we will help you with the return shipping, you can also take advantage of our shipping agreements with lower prices. Costs that will be charged to the customer are the shipping to the customer and the return shipping to us at MYC HiFi. For return approval, the item must be returned in new condition and in the original packaging.

 

Regarding speakers, be aware that speakers may need a long recording time to come into their own. After a couple of hours you can usually get a taste of what to expect, but a speaker deserves 100h+ before serious listening. The speakers we sell with ribbon tweeters need several hundred hours before they start to sing. So feel free to leave the speakers on around the clock so you can quickly accumulate hours.

 

If you have any questions or concerns, do not hesitate to contact us.

 

 

  • Buy & Try applies to goods that are normally kept in stock and not to order goods, unless otherwise agreed.

We provide at least a 2-year warranty on all products, some products have up to a 5-year warranty. With this, you avoid expensive insurances and can feel safe as a customer. In case of problems during the warranty period, contact us and we will solve it quickly and smoothly.


Aune: 2 years

Denon: 2 years

Marantz: 2 years

NuPrime: 2 years

Sbooster: 2 years

Taga Harmony: Passive speakers 5 years

Take Harmony Electronics: 2 years

Take Harmony Cables: 5 years

Quadral: Passive speakers 5 years

Xindak: Cables 5 years


Other products see the manufacturer's warranty.


ATTENTION!

The 2-year warranty does not apply to headphones, demo/service copies or consumables, in these cases the manufacturer's warranty applies. On demo and service copies, the warranty period is stated on the product page.

Lamp warranty

If the lamp for your projector breaks during the first 12 months, or the first 1000 hours (whichever comes first), you will receive a new lamp free of charge. If the manufacturer has a more generous warranty, it applies.