Menu
Your Cart

Taga RB-1650BT

Taga RB-1650BT - In-Wall Speakers
Taga RB-1650BT - In-Wall Speakers
Taga RB-1650BT - In-Wall Speakers
Taga RB-1650BT - In-Wall Speakers
Taga RB-1650BT - In-Wall Speakers
Taga RB-1650BT - In-Wall Speakers
Taga RB-1650BT - In-Wall Speakers
Taga RB-1650BT - In-Wall Speakers

The RB-1650BT is a 2 x 30W RMS active loudspeaker paired with a passive speaker and built-in boat duck. It does not get much easier to get started with good sound in the ceiling or wall with these speakers.
The system is a perfect solution for both residential and commercial installations in restaurants, pubs, shops, conference rooms, gyms, classrooms.

  • Remote control
  • Blue tooth

The RB-1650BT allows you to build a cost-effective audio installation and stream music wirelessly via Bluetooth® (music and internet radio) or wired connection via the stereo input (RCA/3.5mm).
Unique features such as remote control, front and rear IR receivers, Auto Standby and bass/treble controls help integrate the RB-1650BT into any audiovisual installation and make operation easy.
The daisy chain connection makes it possible to connect many pairs of RB BT speakers and build a very large and sophisticated AV installation.

The sound is clear, natural, dynamic and provides wide dispersion throughout the listening area, and thanks to narrow frames, it is difficult to see the speaker in the wall or ceiling!

  • Built-in high-efficiency 2 x 30W RMS amplifier: low operating temperature (Class D amplifier) and external power supply
  • Bluetooth® 4.0 wireless connectivity: stream music and internet radio from smartphones, tablets and more
  • Auto-switching: automatic or manual selection of Bluetooth® input.
  • Bass and treble control.
  • Additional RCA stereo line input: to connect analog sources (CD player, TV tuner, etc.) - RCA and 3.5 mm.
  • Auto Standby: the amplifier turns on when the audio signal is detected and turns off after about 30 minutes of inactivity (can be turned off from the remote control).
  • Remote control (ON/OFF, Bluetooth and line input, Bluetooth priority ON/OFF, Auto Standby ON/OFF, Volume and Mute, Bass/Treble/ and reset).
  • RS-232 serial port: allows integration into a control system.
  • Daisy-chain connection: line output to send the audio signal to the next RB BT speaker.
  • Thin chassis to allow installations even in shallow locations.
  • Volume and tone memory: set it and forget it - the RB-1650 BT remembers the volume and tone control level selected before it was turned off.
The thoughtful design facilitates installations thanks to smart design:
  • TIMPC - TAGA injection molded polymer chassis with honeycomb structure is very rigid and strong to minimize distortions, vibrations or resonances. Additional rubber coating further stiffens the chassis and improves audio performance
  • TEI - TAGA Easy Install mounting brackets are extremely easy and secure to install
  • Directional tweeter to be able to direct the tweeter towards the listening position
  • Front grill is magnetic and paintable.


Specifications:
  • Design: 2-way speaker with built-in amplifier
  • Inputs: RCA, 3.5mm, Bluetooth 4.0
  • Features: bass/treble controls, bluetooth priority, auto standby, IR receiver (both front and rear), RS-232 socket (Phoenix connector)
  • Supplied accessories: Remote control, speaker cable (5m), 24V DC transformer
  • Power amplifier: 2x30W RMS (110W max) Class D
  • Power consumption: DC 24V 3A, AC 100-240V 70W
  • Treble: 25 mm (1") TPTTD, directional
  • Bass/Midrange: 165 mm (6.5") Kevlar®
  • Frequency response: 38Hz - 20kHz
  • Impedance: 8 ohms
  • Sensitivity: 89dB
  • Dimensions: 230 x 95 mm
  • Minimum mounting depth: 130 mm
  • Mounting diameter: 198 mm
  • Weight: Active speaker 1.3kg, Passive speaker 1.2kg
  • Finish: White (Paintable front)

NOTE! Price is for one pair

Write a review

Note: HTML is not translated!
Bad Good



Buy&Try applies to the entire Aune, Auralic, Quadral, Sbooster & Taga range.

Buy & try gives you as a customer the opportunity to try out the product in your own home environment, instead of standing in a stressful store and trying to form an opinion. Rooms behave very differently and affect the sound in different ways and we give you the opportunity to demo the product for a full 30 days, in your own home.

 

If for some reason you feel dissatisfied, just contact us and we will help you with the return shipping, you can also take advantage of our shipping agreements with lower prices. Costs that will be charged to the customer are the shipping to the customer and the return shipping to us at MYC HiFi. For return approval, the item must be returned in new condition and in the original packaging.

 

Regarding speakers, be aware that speakers may need a long recording time to come into their own. After a couple of hours you can usually get a taste of what to expect, but a speaker deserves 100h+ before serious listening. The speakers we sell with ribbon tweeters need several hundred hours before they start to sing. So feel free to leave the speakers on around the clock so you can quickly accumulate hours.

 

If you have any questions or concerns, do not hesitate to contact us.

 

 

  • Buy & Try applies to goods that are normally kept in stock and not to order goods, unless otherwise agreed.

We provide at least a 2-year warranty on all products, some products have up to a 5-year warranty. With this, you avoid expensive insurances and can feel safe as a customer. In case of problems during the warranty period, contact us and we will solve it quickly and smoothly.


Aune: 2 years

Denon: 2 years

Marantz: 2 years

NuPrime: 2 years

Sbooster: 2 years

Taga Harmony: Passive speakers 5 years

Take Harmony Electronics: 2 years

Take Harmony Cables: 5 years

Quadral: Passive speakers 5 years

Xindak: Cables 5 years


Other products see the manufacturer's warranty.


ATTENTION!

The 2-year warranty does not apply to headphones, demo/service copies or consumables, in these cases the manufacturer's warranty applies. On demo and service copies, the warranty period is stated on the product page.

Lamp warranty

If the lamp for your projector breaks during the first 12 months, or the first 1000 hours (whichever comes first), you will receive a new lamp free of charge. If the manufacturer has a more generous warranty, it applies.