Menu
Your Cart

NuPrime Pure AC-04

NuPrime Pure AC-04 - Mains Block & Power Filters
NuPrime Pure AC-04 - Mains Block & Power Filters
NuPrime Pure AC-04 - Mains Block & Power Filters
1-2 Weeks
NuPrime Pure AC-04 - Mains Block & Power Filters
NuPrime Pure AC-04 - Mains Block & Power Filters
NuPrime Pure AC-04 - Mains Block & Power Filters

Pure AC-4 is NuPrime's latest noise canceler that builds on technology implemented in the Evolution reference series. In short, this unit provides very clean voltage and does a far better job than traditional power strips. A total of 4 sockets, and just 4 and no more because problems with interference between devices become imminent with many connected products. So if you want to connect more devices than the possible four, the recommendation is to buy several AC-4.

  • FURUTECH FPX high quality electroplated 24k gold AC sockets that ensure good contact surface and stable transmission.
  • Display shows current voltage and power output, display brightness is adjustable in 2 steps. The display can be turned off.
  • Trigger in/out
  • 2 sockets are intended for low level
  • 2 sockets intended for more powerful products

2 sockets are intended for low-level electronics such as preamplifiers, DACs, etc. while the other two are more for high-power products such as final stages.
We thus get a filtering even on the final stage that does not impinge on dynamics and is capable of large power outputs.

Most of our audio devices share the home AC line with other electrical appliances such as refrigerators, washing machines, air conditioners and LED lights. The household appliances emit electrical noise through the AC line. This is not a problem for a budget installation, but in a high-end audiophile system, this is an area we should pay attention to. Pure AC-4 improves the soundstage and resolution of your audio system. You can hear more detail and overtones in your music.

Most entry-level power conditioners do not do a good job of isolating the noise, nor do they compress the energy from the AC supply. This is due to the physical characteristics of a simple filter design and results in a loss of bass and dynamics. Advanced devices with a sophisticated design that can achieve excellent noise filtering without side effects cost much more for a reason. In addition, high power amplifiers and small signal devices require very different AC filter designs and basic AC filters are not optimized for either.

There are two sets of filters in Pure AC-4 to accommodate different types of applications:

  • Devices sensitive to small signals, such as preamplifiers, DACs and players, each with a current range of 3A to 8A. An extremely powerful 7th order LC filter circuit (with 7 high-power inductors and capacitors) with a maximum of 1000 times isolation performance specifically designed for smaller low-level devices that are highly sensitive to noise interference.
  • High power amplifier with two outputs, each with a current range of 10A to 15A. A fifth order LC filter with 10 to 50 times isolation is designed to withstand a maximum current of 27 A. The inductor is wound with 1.6 mm thick copper wire to allow a high current flow.


Specifications:

  • Output*: 10A x 2, 3A x 2
  • Trigger in: DC3V ~ 30V 2mA
  • Trigger out: DC12V 50mA
  • Dimension: 74mm x 330mm x 253mm (H x W x D)
  • Product weight: 3.5 kg

Write a review

Note: HTML is not translated!
Bad Good



Buy&Try applies to the entire Aune, Auralic, Quadral, Sbooster & Taga range.

Buy & try gives you as a customer the opportunity to try out the product in your own home environment, instead of standing in a stressful store and trying to form an opinion. Rooms behave very differently and affect the sound in different ways and we give you the opportunity to demo the product for a full 30 days, in your own home.

 

If for some reason you feel dissatisfied, just contact us and we will help you with the return shipping, you can also take advantage of our shipping agreements with lower prices. Costs that will be charged to the customer are the shipping to the customer and the return shipping to us at MYC HiFi. For return approval, the item must be returned in new condition and in the original packaging.

 

Regarding speakers, be aware that speakers may need a long recording time to come into their own. After a couple of hours you can usually get a taste of what to expect, but a speaker deserves 100h+ before serious listening. The speakers we sell with ribbon tweeters need several hundred hours before they start to sing. So feel free to leave the speakers on around the clock so you can quickly accumulate hours.

 

If you have any questions or concerns, do not hesitate to contact us.

 

 

  • Buy & Try applies to goods that are normally kept in stock and not to order goods, unless otherwise agreed.

We provide at least a 2-year warranty on all products, some products have up to a 5-year warranty. With this, you avoid expensive insurances and can feel safe as a customer. In case of problems during the warranty period, contact us and we will solve it quickly and smoothly.


Aune: 2 years

Denon: 2 years

Marantz: 2 years

NuPrime: 2 years

Sbooster: 2 years

Taga Harmony: Passive speakers 5 years

Take Harmony Electronics: 2 years

Take Harmony Cables: 5 years

Quadral: Passive speakers 5 years

Xindak: Cables 5 years


Other products see the manufacturer's warranty.


ATTENTION!

The 2-year warranty does not apply to headphones, demo/service copies or consumables, in these cases the manufacturer's warranty applies. On demo and service copies, the warranty period is stated on the product page.

Lamp warranty

If the lamp for your projector breaks during the first 12 months, or the first 1000 hours (whichever comes first), you will receive a new lamp free of charge. If the manufacturer has a more generous warranty, it applies.