-277x57.png "HiFi, ljud & bild | MYC HiFi")
-150x150w.png "M-Spa"){kind=logo}
More from this brand
Tagas largest and most powerful amplifier. With the HTA-2500, you can drive virtually any speaker and get high quality reproduction - It's a delicate music communicator
The HTA-2500B dual-mono 2 x 200W design utilizes 2 high-performance 12AX7-T PSVANE Treasure Mark II vacuum tubes in the preamp section serving as a buffer amplifier and 6 pairs of high-power Sanken transistors (2SC4468/2SA1695) in the output.
The HTA-2500B combines the best of both worlds - soft and analog-like sound character provided by tubes and adding to that high dynamics and power of transistors.
2 toroidal transformers with total output of 1200W (600W per channel) provide large amounts of clean power, high voltage stability and very low AC ripple current. This reflects in higher dynamics and extra pure energy and greater abilities to properly drive very demanding and powerful speakers.
Audiophile grade ELNA capacitors (2 x 80V/10000uF for each channel) ensure stable playback improving music tone and sound field depth.
Audiophile grade Japanese ALPS volume potentiometer provides minimal noises and channels crosstalk and has excellent operational feel and limits errors between the two channels.
Oversized aluminum heat sink system (independent heat sink for each channel) helps to disperse internal heat and allows for long term high power playback with limited distortions.
The high-end class, gold-plated speaker terminals offer almost lossless audio signal transmission to speakers.
Analog inputs with high-end solid machined brass RCA sockets can accommodate up to 2 stereo devices.
You can connect a range of digital devices via optical and coaxial inputs and a built-in high-resolution 24bit / 192kHz DAC (based on Wolfson WM8805 and Cirrus Logic CS4344 circuits) will always provide the best sound performance.
The HTA-2500B is also an ideal companion for mobile devices - stream music from smartphones, tablets or computers compatible with Bluetooth®.
For those who prefer discrete listening we equipped the HTA-2500B with a high-end headphone preamplifier.
A preamplifier output is dedicated for an optional external power amplifier or powered subwoofer and speakers.
The HTA-2500B offers additional options for easy upgrading the sound quality:
- Removable IEC power cable gives you an option to upgrade your system with a premium audiophile power cable in any time;
- The tubes are installed in high-quality ceramic sockets and they can be very easily exchanged for new tubes of your choice.
The HTA-2500B is a splendid mixture of analog tube sound, power, precision, purity and multidimensional soundstage imaging!
Hybrid amplifier
What does it mean and why does TAGA Harmony use this approach?
Hybrid means a combination of two different techniques to create an amplifier in one device: the World of tubes and the World of transistors.
TAGA Harmony amplifiers use vacuum tubes in the preamp section and transistors in the power stage. This results in tube, soft and analog-like sound character and at the same time high dynamics and power provided by transistors, which is usually a weak point of pure tube designs.
The sound of TAGA Harmony hybrid amplifiers is not only silky and rich but also powerful and dynamic. In addition, hybrid amplifiers compared to pure tube amps have better abilities to properly drive different kind of speakers.
After being turned on a hybrid amplifier requires to warm up its tubes to reach its full sound capabilities - it usually takes from 5 to 15 minutes depending on model and room temperature.
| Design | Hybrid amplifier Class A/B Dual Mono |
| Vacuum tubes | 2 x 12AX7-T PSVANE Treasure Mark II |
| Power output / impedance | 2 x 200W 8ohm 2 x 400W 4ohm |
| DA converter | 24bit / 192 kHz Wolfson WM8805 Cirrus Logic CS4344 |
| Wireless connectivity | Bluetooth® v4.0 |
| Digital inputs | Optical, Coaxial |
| Analog inputs | CD, Line |
| Analog outputs | RCA Pre-Out |
| Headphone output | Impedance: 32-300ohm Output power: 350mW, 300ohm |
| Frequency response | 20Hz - 35kHz (±0.5dB) |
| Total Harmonic Distortions | ≤0.15% (1kHz 1W) |
| Signal to noise ratio | 92dB |
| Features / accessories | Dimmer - tube window backlight Mode: Direct, Loudness Regulation: Bass 100Hz ±12dB Treble 10kHz ±12dB Aluminum remote controller Bluetooth® antenna Removable IEC power cord |
| AC power / power consumption | 230-240V 50Hz, 1200W (max) |
| Dimensions (H x W x D) | 14 x 43 x 44 cm |
| Weight | 21 kg / pc. |
Buy&Try applies to the entire Aune, Auralic, Quadral, Sbooster & Taga range.
Buy & try gives you as a customer the opportunity to try out the product in your own home environment, instead of standing in a stressful store and trying to form an opinion. Rooms behave very differently and affect the sound in different ways and we give you the opportunity to demo the product for a full 30 days, in your own home.
If for some reason you feel dissatisfied, just contact us and we will help you with the return shipping, you can also take advantage of our shipping agreements with lower prices. Costs that will be charged to the customer are the shipping to the customer and the return shipping to us at MYC HiFi. For return approval, the item must be returned in new condition and in the original packaging.
Regarding speakers, be aware that speakers may need a long recording time to come into their own. After a couple of hours you can usually get a taste of what to expect, but a speaker deserves 100h+ before serious listening. The speakers we sell with ribbon tweeters need several hundred hours before they start to sing. So feel free to leave the speakers on around the clock so you can quickly accumulate hours.
If you have any questions or concerns, do not hesitate to contact us.
- Buy & Try applies to goods that are normally kept in stock and not to order goods, unless otherwise agreed.
-300x300h.jpeg "TAGA ETPC Kontakter (C7)")
