Menu
Your Cart

Taga HTA-800B

Taga HTA-800B - Integrated Amplifier
Taga HTA-800B - Integrated Amplifier
Taga HTA-800B - Integrated Amplifier
Taga HTA-800B - Integrated Amplifier
Taga HTA-800B - Integrated Amplifier
New
Taga HTA-800B - Integrated Amplifier
Taga HTA-800B - Integrated Amplifier
Taga HTA-800B - Integrated Amplifier
Taga HTA-800B - Integrated Amplifier
Taga HTA-800B - Integrated Amplifier

The Taga HTA-800B is the perfect amplifier for those who want the best of both the analog and digital audio worlds, whether you prefer vinyl, streaming or digital sources.
Experience the perfect combination of the warm analog sound of the tube amplifier and the powerful performance of the transistor.
Two 6H3N vacuum tubes in the preamplifier section combine with four Toshiba transistors for a warm, linear and lifelike sound with high dynamics.

  • Wireless connectivity: Bluetooth® to stream music from smartphones, tablets or computers.
  • Built-in Riia amplifier (for MM pickup)
  • Optical and coaxial inputs with 24-bit/192kHz DAC
  • Pre-out for connecting external power amplifier or subwoofer
  • Built-in headphone amplifier
  • Aluminum remote control

Hybrid amplifier:
What does it mean and why does TAGA Harmony use this method?
Hybrid means combining two different technologies to create an amplifier in one device: the world of tubes and the world of transistors.
TAGA Harmony amplifiers use vacuum tubes in the preamplifier section and transistors in the power stage. This results in a smooth and analog sound character and at the same time high dynamics and power from transistors, which is usually a weak point in pure tube designs.
The sound of TAGA Harmony hybrid amplifiers is not only silky and rich, but also powerful and dynamic. In addition, compared to pure tube amplifiers, hybrid amplifiers have a better ability to drive different types of speakers properly.
After a hybrid amplifier is switched on, the tubes need to be warmed up for it to reach its full sound capacity - this usually takes between 5 and 15 minutes depending on the model and room temperature.


Specifications:

  • Design: Class A/B hybrid amplifier
  • Vacuum tubes: 2 x 6H3N
  • Power: 2 x 50W 8ohm, 2 x 80W 4ohm
  • DAC: 24bit / 192 kHz MS4344
  • Bluetooth: v4.0
  • Digital inputs: Optical, Coaxial
  • Analog Inputs: 2 x RCA + Phono (MM)
  • Analog Outputs: RCA Pre-Out
  • Headphone output: Impedance: 16ohm, Output power: 150mW
  • Frequency range: 20Hz-20kHz (±0.5dB)
  • THD: 0.5%
  • Signal to noise ratio: 80dB
  • Features: Tone controls for bass and treble, Direct and Loudness sound mode
  • Supplied accessories: Remote control, Schuko-IEC C13 Power cable, BT antenna
  • Power consumption: 230W (max)
  • Dimensions (HxWxD): 11.5 x 43 x 33 cm
  • Weight: 8.2kg

Write a review

Note: HTML is not translated!
Bad Good



Buy&Try applies to the entire Aune, Auralic, Quadral, Sbooster & Taga range.

Buy & try gives you as a customer the opportunity to try out the product in your own home environment, instead of standing in a stressful store and trying to form an opinion. Rooms behave very differently and affect the sound in different ways and we give you the opportunity to demo the product for a full 30 days, in your own home.

 

If for some reason you feel dissatisfied, just contact us and we will help you with the return shipping, you can also take advantage of our shipping agreements with lower prices. Costs that will be charged to the customer are the shipping to the customer and the return shipping to us at MYC HiFi. For return approval, the item must be returned in new condition and in the original packaging.

 

Regarding speakers, be aware that speakers may need a long recording time to come into their own. After a couple of hours you can usually get a taste of what to expect, but a speaker deserves 100h+ before serious listening. The speakers we sell with ribbon tweeters need several hundred hours before they start to sing. So feel free to leave the speakers on around the clock so you can quickly accumulate hours.

 

If you have any questions or concerns, do not hesitate to contact us.

 

 

  • Buy & Try applies to goods that are normally kept in stock and not to order goods, unless otherwise agreed.

We provide at least a 2-year warranty on all products, some products have up to a 5-year warranty. With this, you avoid expensive insurances and can feel safe as a customer. In case of problems during the warranty period, contact us and we will solve it quickly and smoothly.


Aune: 2 years

Denon: 2 years

Marantz: 2 years

NuPrime: 2 years

Sbooster: 2 years

Taga Harmony: Passive speakers 5 years

Take Harmony Electronics: 2 years

Take Harmony Cables: 5 years

Quadral: Passive speakers 5 years

Xindak: Cables 5 years


Other products see the manufacturer's warranty.


ATTENTION!

The 2-year warranty does not apply to headphones, demo/service copies or consumables, in these cases the manufacturer's warranty applies. On demo and service copies, the warranty period is stated on the product page.

Lamp warranty

If the lamp for your projector breaks during the first 12 months, or the first 1000 hours (whichever comes first), you will receive a new lamp free of charge. If the manufacturer has a more generous warranty, it applies.