Menu
Your Cart

Taga HTA-700B V.3

Taga HTA-700B V.3 - Integrated Amplifier
Taga HTA-700B V.3 - Integrated Amplifier
Taga HTA-700B V.3 - Integrated Amplifier
Taga HTA-700B V.3 - Integrated Amplifier
Taga HTA-700B V.3 - Integrated Amplifier
Taga HTA-700B V.3 - Integrated Amplifier
Taga HTA-700B V.3 - Integrated Amplifier
Taga HTA-700B V.3 - Integrated Amplifier

The HTA-700 V3 is a lavish minimalist stereo amplifier with seductive sound and easy handling. In the latest generation, a more lavish DAC part, better amplifier circuit, finer tubes in the preamplifier, extra RCA input and aluminum remote control. The amplifier impresses with its large reproduction for its small format, you are met by a very exclusive sound image that could just as well belong to much more expensive designs.

  • Built-in AKM DAC with optical input
  • Built-in headphone amplifier
  • Low level output for dedicated end stages or use of subwoofer
  • Bluetooth 4.0 with strong signal strength
  • Aluminum remote control

The HTA-700B v.3 is the latest edition of TAGA`s highly awarded and extremely popular hybrid amplifier. It uses 2 x 12AU7 Shuguang tubes in the preamp section acting as buffer amplifiers and a pair of TDA7296 transistors in the output. The HTA-700B v.3 combines the best of both worlds - smooth and analog sound character from tubes and also high dynamics and power from transistors.

  • The revised 150W toroidal transformer provides large amounts of clean power, high voltage stability and very low AC ripple current. This is reflected in higher dynamics and extra clean energy, as well as greater ability to drive different types of speakers properly.
  • High-quality capacitors (2 x 50 V/3300 uF) ensure stable playback and improve the tone of the music and the depth of the sound field. To provide the best possible sound clarity, the HTA-700B v.3 utilizes audiophile-grade Wima capacitors used on the input to and output from the tubes as well as for the tone controls.
  • The audiophile-grade Japanese ALPS volume potentiometer provides minimal noise and crosstalk between channels and has excellent sensitivity and limits errors between the two channels.
  • Oversized aluminum heat sink system (independent heat sink for each channel) helps dissipate internal heat and allows for long-lasting high-power playback with limited distortion.
  • The gold-plated speaker terminals of the highest class provide almost lossless transmission of audio signals to the speakers. In addition to two analog sources, you can connect a variety of digital devices via optical input, and a built-in high-resolution 24bit/192kHz DAC (based on SA9123 and AK4430 circuits) always provides the best possible audio performance.
  • The HTA-700B v.3 is also a perfect companion for mobile devices - streaming music from smartphones, tablets or computers via Bluetooth.
  • For those who prefer discreet listening, TAGA has equipped the HTA-700B v.3 with a headphone preamplifier for headphones.
  • A preamplifier output for an external power amplifier or subwoofer
The HTA-700B v.3 is an amazing blend of analog tube sound, power, precision, purity and multi-dimensional soundstage!


Specifications:

  • Design Hybrid amplifier, Class A/B
  • Preamplifier tubes 2 x 12AU7
  • Power / impedance 2 x 45W 4ohm
  • 2 x 26W 8ohm
  • DA converter AKM AK4430 DAC with SA9123 chip
  • Wireless connection Bluetooth® v4.0
  • Digital inputs Optical
  • Analog inputs CD, Line
  • Analog outputs Stereo RCA
  • Headphone output Impedance: 32 - 300ohm
  • Output power: 300mW, 300ohm
  • Frequency response 20Hz - 20kHz (±2dB)
  • Total harmonic distortion ≤1% (1kHz/ 1W)
  • Signal to noise ratio 75dB
  • Tonal adjustment: Bass 100Hz ±8dB, Treble 10kHz ±10dB
  • Aluminum remote control
  • Dimensions (H x W x D) 14 x 20 x 27 cm
  • Weight 5.2 kg

Write a review

Note: HTML is not translated!
Bad Good



Buy&Try applies to the entire Aune, Auralic, Quadral, Sbooster & Taga range.

Buy & try gives you as a customer the opportunity to try out the product in your own home environment, instead of standing in a stressful store and trying to form an opinion. Rooms behave very differently and affect the sound in different ways and we give you the opportunity to demo the product for a full 30 days, in your own home.

 

If for some reason you feel dissatisfied, just contact us and we will help you with the return shipping, you can also take advantage of our shipping agreements with lower prices. Costs that will be charged to the customer are the shipping to the customer and the return shipping to us at MYC HiFi. For return approval, the item must be returned in new condition and in the original packaging.

 

Regarding speakers, be aware that speakers may need a long recording time to come into their own. After a couple of hours you can usually get a taste of what to expect, but a speaker deserves 100h+ before serious listening. The speakers we sell with ribbon tweeters need several hundred hours before they start to sing. So feel free to leave the speakers on around the clock so you can quickly accumulate hours.

 

If you have any questions or concerns, do not hesitate to contact us.

 

 

  • Buy & Try applies to goods that are normally kept in stock and not to order goods, unless otherwise agreed.

We provide at least a 2-year warranty on all products, some products have up to a 5-year warranty. With this, you avoid expensive insurances and can feel safe as a customer. In case of problems during the warranty period, contact us and we will solve it quickly and smoothly.


Aune: 2 years

Denon: 2 years

Marantz: 2 years

NuPrime: 2 years

Sbooster: 2 years

Taga Harmony: Passive speakers 5 years

Take Harmony Electronics: 2 years

Take Harmony Cables: 5 years

Quadral: Passive speakers 5 years

Xindak: Cables 5 years


Other products see the manufacturer's warranty.


ATTENTION!

The 2-year warranty does not apply to headphones, demo/service copies or consumables, in these cases the manufacturer's warranty applies. On demo and service copies, the warranty period is stated on the product page.

Lamp warranty

If the lamp for your projector breaks during the first 12 months, or the first 1000 hours (whichever comes first), you will receive a new lamp free of charge. If the manufacturer has a more generous warranty, it applies.