Menu
Your Cart

Taga TTA-500

Taga TTA-500 - Integrated Amplifier
Taga TTA-500 - Integrated Amplifier
Taga TTA-500 - Integrated Amplifier
Taga TTA-500 - Integrated Amplifier
Taga TTA-500 - Integrated Amplifier
Taga TTA-500 - Integrated Amplifier
DISCONTINUED
Taga TTA-500 - Integrated Amplifier
Taga TTA-500 - Integrated Amplifier
Taga TTA-500 - Integrated Amplifier
Taga TTA-500 - Integrated Amplifier
Taga TTA-500 - Integrated Amplifier
Taga TTA-500 - Integrated Amplifier

The TTA-500 sets a new bar for quality in the price range and is awarded the Polish Audio/Video Product of the Year -2019.



TTA-500 is 2 x 35W Class AB high fidelity vacuum tube integrated amplifier utilizing four EL34 tubes in the output stage and a 12AX7 tube preamp section, composed of two 6SN7 tubes as drivers, and a Triode / Pentode mode selector switch.

TTA-500 uses audiophile-grade coupling capacitors: Wima for input and connecting driver tubes with the output amp, and Rubycon capacitors in the power filtering.

The amplifier sounds in a very warm, lifelike way and high dynamics and the sound is very linear with almost no negative feedback.

High-quality EI broadband sound output transformer provides voltage stability and constant and immediately-available energy at any volume level. The both channels use independent rectifier and filter circuits in the supply power. The sound is natural and fresh with deep multidimensional soundstage.


The audiophile grade ALPS volume potentiometer ensures minimal noises and channels crosstalk and has excellent operational feel and limits errors between the two channels.

The high-end class, gold-plated speaker terminals offer almost lossless audio signal transmission to speakers.


Analog inputs with high-end solid machined brass RCA sockets can accommodate up to 3 stereo devices.

The preamplifier input (HT input) is dedicated for using the TTA-500 as a tube power amplifier and allows to connect it to your Home Theater system (AV receiver or amp) to drive front left and right channels - now you can use the same pair of speakers in your high-end stereo as well as in the multichannel system without switching speaker cables nor changing the amplifier.


The removable IEC power cable gives you an option to upgrade your system with a premium audiophile power cable in any time.

The TTA-500 amplifier does not only sound great but it also looks magnificently. The front and side walls of the housing are made of thick 6 mm aluminum. The vacuum tube decorative panel is finished in a modern brushed aluminum color.

Enjoy the analog sound at its best - Enjoy the TTA-500!



Best Buy 06-2018

FOR CONNOISSEURS OF PLEASANT SOUND

"The TTA-500 with the standard tubes onboard is characterized byexcellent control of the low frequency range in both modes - triode and pentode. Of course the triode mode requires speakers with slightly higher sensitivity but if we satisfy this condition then the amplifier will pay back with thesplendid rhythm in the bass range.
Based on this fact we can tell that not only the amplifier's tube output stages are well built in terms of current efficiency but that it also has an efficient power supply which provides a big power reserve much beyond the nominal demand of the output tubes.
Thanks to good control of the bass and decent dynamics the TTA-500 feels good in music which demands very vivid presentation and especially fast attack, mostly in the macro scale. If you are fans of rock, metal or even music from the dance floors then this tube integrated amp will give you a lot of joy in playing such music genres.
As befits tube amplification Taga Harmony TTA-500 offers nice , juicy and most of all open mids that is why when you want to fully use its potential, especially in the classical or jazz music, then I recommend to match it with speakers which provide rich details in the mid frequencies including the newest Taga Harmony models from the Platinum series (I had an opportunity to personally work on their sound)...."


Summary
"Taga Harmony TTA-500 presents such a complete and most of all consistent sound that I can admit with a clear conscience it is one of the best tube constructions I have ever had a chance to meet with in this price level.
And what distinguishes this amplifier?...
The manufacturer has not invested in optional, trendy features and put the money which was "saved" in that way in fine tuning of circuits which have a direct impact on a sound.

The result is that the TTA-500 sounds like a pure valve amplifier and besides it offers the triode mode which will be definitely used by owners of high-efficiency loudspeakers.And it does not cost a fortune so the solid tube technology is almost available at your fingertips."

CLEAR RECOMMENDATION!

Mr. Holger Barske
/Editor in chief of German LP magazine/

"... each of the four tested devices (prices between 1700.- - 12.000 Euro) has its own character, but each provided a lot of fun in their own way what I have not seen for a long time. That also applies to the most affordable TAGA amplifier (about 1700.- Euro)!"

Summary:

"The TAGA TTA-500 is a thoroughly attractive device for connoisseurs and newcomers to the world of tube amplifiers. CLEAR RECOMMENDATION!"


Specifications:

Power Output:

2 x 35W Pentode Mode
2 x 17W Triode Mode
Push-pull Class AB

Output Impedance: ,

Vacuum Tubes:

4 x EL34, 2 x 6SN7, 1 x 12AX7

Write a review

Note: HTML is not translated!
Bad Good



Buy&Try applies to the entire Aune, Auralic, Quadral, Sbooster & Taga range.

Buy & try gives you as a customer the opportunity to try out the product in your own home environment, instead of standing in a stressful store and trying to form an opinion. Rooms behave very differently and affect the sound in different ways and we give you the opportunity to demo the product for a full 30 days, in your own home.

 

If for some reason you feel dissatisfied, just contact us and we will help you with the return shipping, you can also take advantage of our shipping agreements with lower prices. Costs that will be charged to the customer are the shipping to the customer and the return shipping to us at MYC HiFi. For return approval, the item must be returned in new condition and in the original packaging.

 

Regarding speakers, be aware that speakers may need a long recording time to come into their own. After a couple of hours you can usually get a taste of what to expect, but a speaker deserves 100h+ before serious listening. The speakers we sell with ribbon tweeters need several hundred hours before they start to sing. So feel free to leave the speakers on around the clock so you can quickly accumulate hours.

 

If you have any questions or concerns, do not hesitate to contact us.

 

 

  • Buy & Try applies to goods that are normally kept in stock and not to order goods, unless otherwise agreed.

We provide at least a 2-year warranty on all products, some products have up to a 5-year warranty. With this, you avoid expensive insurances and can feel safe as a customer. In case of problems during the warranty period, contact us and we will solve it quickly and smoothly.


Aune: 2 years

Denon: 2 years

Marantz: 2 years

NuPrime: 2 years

Sbooster: 2 years

Taga Harmony: Passive speakers 5 years

Take Harmony Electronics: 2 years

Take Harmony Cables: 5 years

Quadral: Passive speakers 5 years

Xindak: Cables 5 years


Other products see the manufacturer's warranty.


ATTENTION!

The 2-year warranty does not apply to headphones, demo/service copies or consumables, in these cases the manufacturer's warranty applies. On demo and service copies, the warranty period is stated on the product page.

Lamp warranty

If the lamp for your projector breaks during the first 12 months, or the first 1000 hours (whichever comes first), you will receive a new lamp free of charge. If the manufacturer has a more generous warranty, it applies.